A few photos from around the shop....

[Rick@Livernois]

Today we had a photographer in taking some photos of some of our equipment for an upcoming advertisement and he also sent a few shots he took of some other cars getting work done.









Some machinery













The shop racecar







6.66 @ 215 mph

6.67 @ 215 mph

-Rick

[GRRRR8]

Beautiful facility and man its HUGE!

[99-LS1-SS]

The facility AND the turbo!

[Rick@Livernois]

Thank you Charlie! Photos don't do it justice and people can't believe how big it is once inside, because even from outside it doesn't look as big as it is.

A little more info since I didn't post pics of the entire shop:

Livernois Motorsports, located in Dearborn Heights, MI, specializes in Ford, GM, and Chrysler late model performance and tuning.

• 36,000 square foot facility
• Installation area with 15 hoists
• Chassis dynamometers
• Engine dyno
• Full engine machine shop and engine build facility
• Fabrication shop
• Cylinder head development center
• Flowbenches
• CNC machines
• Retail parts showroom
• Show quality paint and body facility

In addition to a custom line of in house developed CNC cylinder heads, rotating assemblies, and shortblocks, Livernois Motorsports' fabrication and machine shop can provide a reliable package for a daily driven street car to an all out race car. With the availability of parts from hundreds of manufacturers, Livernois Motorsports can supply you with virtually any high performance product that you may require.


Dyno Services
Livernois Motorsports provides three dynamometer capabilities to dyno tune your vehicle or engine.

Our load bearing Mustang Chassis Dynamometer can handle speeds over 200 miles per hour and over 1700 rear wheel horsepower.

The Mustang Dynamometer allows for accurate tuning with integrated air/fuel and boost monitoring under real-world loading conditions. This means a safe tune with plenty of power.

Our portable Dyno-Jet Chassis Dynamometer can be used at our service center or set-up at your location. This system is accurate, easy to use, and very popular with car show organizers and car clubs. The mobile Dyno-Jet is available to rent, through Livernois Motorsports, for your next event.

Our Super Flow Engine Dynamometer can handle up to 2,000 horsepower and 10,000 RPM. Used on everyday street engines, to full blown race applications, our dynamometer specialists can maximize the performance of your engine before installing it into a vehicle.

These dynamometer capabilities allow Livernois Motorsports to sell combinations that work.

Machine Shop Services
• Engine Component Balancing
• Cylinder Block Preparation
- Milling
- Boring
- Honing
- Align Honing
- Clearancing for Stroker Crankshaft Assemblies
• Connecting Rod Reconditioning
• Piston Machining
• Custom CNC Machining
• Cylinder Head Machining
- Milling
- CNC Port Machining
- CNC Valve Seat & Guide Machining
• Specialty Services
- Cryogenics
- Coatings

Engine Build
• Short Block Assembly
• Long Block Assembly
• Complete Engine Assembly

Cylinder Head Services
• Valve Jobs
• Valve Guide Replacement
• Assembly
• Flow Bench Testing
• CNC Porting
• CNC Valve Seat & Guide Machining
• Hand Porting

Vehicle Transportation Services
We realize that many of you are quite a distance from our Dearborn Heights, MI location and have interest in our services, but are not able to make the drive due to work and busy schedules.

We have a single vehicle enclosed trailer or a two vehicle enclosed trailer if there are two vehicles in close proximity to each other. With this service, you can trust that you car will make it to our location and back to you safely, and with much more power than it arrived with!

Cost of this service is very reasonable, but varies based on a distance and the availability of our trailer.

-Rick

[PaycheckG8]

I've been there. Huge don't come close!

[GeorgeInNePa]

I've been there. Huge don't come close!

That's what she said!

[KEV-O]

That's what she said!

That's what she said last night
........................................

[GTPprix]

I'm still waiting for my vid Rick... you know which one

[chipman283]

Damn that place is sweet! I will get there for a CAI and a tune someday.

[G8GT721]

wow! is right