Site Sponsors & Vendors
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Hoosier drag radial vs Mickeythompson et streets?

  1. #1
    Another stock mustang wnt2gofst's Avatar
    Join Date
    Sep 2009
    Location
    Columbus, GA
    Posts
    4,781
    Post Thanks / Like

    Default Hoosier drag radial vs Mickeythompson et streets?

    Ordered rims today to run drag radials. Been looking at threads and I see most are running The Mickey Thompson et streets. Now then went to post and few tire places around here and all them say they cant get them(ET Streets) but they can get the Hoosier drag radials, or the hoosier r6/a6 drag radilas. I can get the et streets offline. Just wondering if any one has ran hoosier drag radials and if there any good. Or if i am best just getting the Et streets off line.
    2014 Harley Davidson Street Bob-Vance and Hines Short Shot staggered.

    2013 F150 Ecoboost- Loaded and stock.

  2. #2
    Addicted Member familycaronROIDS!'s Avatar
    Join Date
    Apr 2009
    Location
    S.California
    Posts
    931
    Post Thanks / Like

    Default

    I am gonna try out the Hoosiers when my Nitto NT555r wear out. I have never heard anything bad about Hoosier Drag Radials/slicks. I guess the main reason I would go that route is cause every one has ET Street MT's (I know cause they get the job done).

    My other choice is M&H 275-50-17 Drag Radials..
    Last edited by familycaronROIDS!; 02-12-2010 at 06:02 PM.

    2009 G8 GT
    Wrenched&tuned@CMS w/N2o
    518rwhp-450rwtq
    11.4@121mph DA2400+
    sound clip:
    http://www.youtube.com/watch?v=h8trh7SkzQg
    racing
    http://www.youtube.com/watch?v=DA5td_Jm1OE

  3. #3
    Another stock mustang wnt2gofst's Avatar
    Join Date
    Sep 2009
    Location
    Columbus, GA
    Posts
    4,781
    Post Thanks / Like

    Default

    Im looking at your sig seeing your mods. Are you running a cam also? If not hwo does the 3600 stall work. You think it is good or should have went smaller. Reason i ask is our numbers are right there with each other. And what are you running right now in 1/4. Im shooting fo rmid 12's. Well if the track prep is decent.
    2014 Harley Davidson Street Bob-Vance and Hines Short Shot staggered.

    2013 F150 Ecoboost- Loaded and stock.

  4. #4
    Another stock mustang wnt2gofst's Avatar
    Join Date
    Sep 2009
    Location
    Columbus, GA
    Posts
    4,781
    Post Thanks / Like

    Default

    Just seen you are not running cam yet in another post.......lol...
    2014 Harley Davidson Street Bob-Vance and Hines Short Shot staggered.

    2013 F150 Ecoboost- Loaded and stock.

  5. #5
    Addicted Member familycaronROIDS!'s Avatar
    Join Date
    Apr 2009
    Location
    S.California
    Posts
    931
    Post Thanks / Like

    Default

    Quote Originally Posted by wnt2gofst View Post
    Just seen you are not running cam yet in another post.......lol...
    Not yet but it is on order .. I havent ran it with the Yank yet. I have tested it out and it is beasty....

    With the mods I have now excluding the Converter the GTO 17" wheel with 245-40-17 NT555r Nitto's work fine they grab good and they are cheap too..

    Now with the converter & the cam soon to come I am hoping to go with a little more meat 275-50-17 M&H is the only that I know that makes that size tire.

    2009 G8 GT
    Wrenched&tuned@CMS w/N2o
    518rwhp-450rwtq
    11.4@121mph DA2400+
    sound clip:
    http://www.youtube.com/watch?v=h8trh7SkzQg
    racing
    http://www.youtube.com/watch?v=DA5td_Jm1OE

  6. #6
    Another stock mustang wnt2gofst's Avatar
    Join Date
    Sep 2009
    Location
    Columbus, GA
    Posts
    4,781
    Post Thanks / Like

    Default

    Cool. Been looking at cams as well. But think next thing will prolly to finish my ported intake and throttle.
    2014 Harley Davidson Street Bob-Vance and Hines Short Shot staggered.

    2013 F150 Ecoboost- Loaded and stock.

  7. #7
    Addicted Member familycaronROIDS!'s Avatar
    Join Date
    Apr 2009
    Location
    S.California
    Posts
    931
    Post Thanks / Like

    Default

    Quote Originally Posted by wnt2gofst View Post
    Im looking at your sig seeing your mods. Are you running a cam also? If not hwo does the 3600 stall work. You think it is good or should have went smaller. Reason i ask is our numbers are right there with each other. And what are you running right now in 1/4. Im shooting fo rmid 12's. Well if the track prep is decent.
    I love my 3600 stall converter. Keep in mind my car is not a daily driver but if it was I would of still went 3600..

    2009 G8 GT
    Wrenched&tuned@CMS w/N2o
    518rwhp-450rwtq
    11.4@121mph DA2400+
    sound clip:
    http://www.youtube.com/watch?v=h8trh7SkzQg
    racing
    http://www.youtube.com/watch?v=DA5td_Jm1OE

  8. #8
    Another stock mustang wnt2gofst's Avatar
    Join Date
    Sep 2009
    Location
    Columbus, GA
    Posts
    4,781
    Post Thanks / Like

    Default

    I will order one soon enough think i will run a 3200 or so. I went ahead and just ordered the hoosier drag radials.
    2014 Harley Davidson Street Bob-Vance and Hines Short Shot staggered.

    2013 F150 Ecoboost- Loaded and stock.

  9. #9
    Addicted Member familycaronROIDS!'s Avatar
    Join Date
    Apr 2009
    Location
    S.California
    Posts
    931
    Post Thanks / Like

    Default

    Quote Originally Posted by wnt2gofst View Post
    I will order one soon enough think i will run a 3200 or so. I went ahead and just ordered the hoosier drag radials.
    Let me know how they work out..

    2009 G8 GT
    Wrenched&tuned@CMS w/N2o
    518rwhp-450rwtq
    11.4@121mph DA2400+
    sound clip:
    http://www.youtube.com/watch?v=h8trh7SkzQg
    racing
    http://www.youtube.com/watch?v=DA5td_Jm1OE

  10. #10
    Smells of Bacon... GeorgeInNePa's Avatar
    Join Date
    Aug 2008
    Location
    Clarks Summit, Pa.
    Posts
    9,788
    Post Thanks / Like

    Default

    I'm going to try the Hoosier DRs next time. On smaller rims...



    2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)

    '08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
    http://img.photobucket.com/albums/v3...a/gr_devil.gif
    Plastic Cuttin' Bad Ass!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •