Site Sponsors & Vendors
Results 1 to 4 of 4

Thread: My hunt for the 9s

  1. #1
    Member 98blueSScamaro's Avatar
    Join Date
    Jul 2015
    Location
    Aurora il
    Posts
    38
    Post Thanks / Like

    Default My hunt for the 9s

    Well last weekend Saturday I made it out to Great Lakes Drag way.. I was going with a full car 2 kids 1 wife 1 car seat and all there junk. 75 miles to the driving the car there and back. I bolted up my slicks once at the track. and let the car sit to cool down. made my first pass and boy was i shocked. I did not know how the car would hook so i was lazy and easy out of the hole and the car hooked and booked. i ended up going a 10.766 @137.38 with a 1.90 60foot

    well after 2 passes in the 10.18 range and track prep was not there with 139 mph i figured i would park the car and watch a few others for a few.

    Well after about 45 mins the track was closing and i noticed some one i knew was at the track with there chevy ss with a lsa and more work. we both got in the lanes and we both where able to get a side by side race. well i tryed to come out of the whole better this time and managed to pull off a 10.13 @140.36 mph with a still lazy 1.51 60.
    Click this bar to view the full image.


    YouTube (Short URL)https://youtu.be/XiRkPYrdZpA

    Mods are
    Straight line perf Custom S.D Tune And Rick Crawford Trans tune
    6.0 With rods and Pistons
    heads are just Good valve springs
    Cam custom grind
    Tvs 2300 maggie with cog and 2.90 pulley with 8 rib belt setup From Innovations west RDS spacer plate ported lower intake by myself
    Roto fab chevy ss 4in intake needs a custom 5in bad
    ngk tr7 non projected tip plugs
    E85 with fore twin 450 fuel pumps and vaporworz e85 pump module
    8an from pump to rail returnless with a flex fuel sensor
    American racing headers and x pipe to magnaflow cat back no cutouts
    Adam Cooper Ace performance 6l80 HD trans
    stock zl1 converter
    Camaro 3.45 diff yes this needs to go i had to use 5th gear at the track
    and full weight

    Here is pics and Vids
    I really hope to be in the 9s with a gear change and better 60 to be in the 9s
    Last edited by 98blueSScamaro; 10-15-2016 at 05:48 PM.
    forged bottom ported heads 614/624 222/238 cam tvs2300 cog setup 8 rib pulleys tr7 non projected tips msd bap fuel system fic1000 injectors e85 ARH 1&7/8's headers and x pipe magnaflow mufflers Camaro diff v8 supercar coil overs vig 2800 triple disc

  2. #2
    Beyond Help
    Join Date
    Jul 2009
    Location
    Friendswood, TX
    Posts
    1,439
    Post Thanks / Like

    Default

    Man - just noticed this post. That is a hard charging G8!
    2009 G8 GT
    ARH Long Tubes 1 7/8" / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson Supercharger 1.9 / Ported blower base / 2.8" Pulley / LS3 rockers with Trunion upgrade / Trick Flow LS3 cylinder heads / Overdrive "non-cog" pulley system / 8-Rib Pulley system / ATI Super Damper / DOD Delete / Lunati Lifters / Custom Patrick G Cam Grind / Wiseco Forged Pistons / Injector Dynamics 85lbs / 4" RotoFab Intake Tube / 90mm MAF Tube / VMax 90mm Ported Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan / Custom Engine & Tranny Tune by Patrick G / Eibach Lowering Springs / BMR Front & Rear Sway Bars & LCA's / Moog Front Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads / Breyton BE Wheels

  3. #3
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    4,848
    Post Thanks / Like

    Default

    Quote Originally Posted by hflores3 View Post
    Man - just noticed this post. That is a hard charging G8!
    It's incredible to think where these cars were a few years ago to now there are a handful deep into the 9s. Incredible.
    2009 PBM G8 GT
    Pat G 218/226, ARP Bits, DSteck/Shane Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Comp Cams Trunion Upgrade Kit, ARH 1 7/8 catted/Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID850 injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  4. #4
    Member
    Join Date
    May 2017
    Location
    Lima, Ohio
    Posts
    48
    Post Thanks / Like

    Default

    That's crazy MPH for that heavy of a car.. Updates??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •